How To Paint Over Wallpaper
Painting Over Wallpaper Ask An Expert
Q: I am tired of stripping wallpaper and have a bedroom where I would like to paint over it. The wallpaper has a raised vertical pattern that looks like ribbons of string. What is the best method to do this? What should be used as the base coat? Can I use glazes over the paint or would it be too much for the wallpaper?
A: Matt Jaworski, owner of Jaworski Interiors & Exteriors Painting and Decorating says “First, the good news: You can paint your bedroom, bathroom or any other room with out stripping the wall paper. “
Now, the bad news: Because the wallpaper is textured, it will require more prep work. The walls will need to be primed and coated with joint compound and sanded before you paint.
Wallpaper removal and striping can be a time consuming job If there are several layers or wallpaper, or the wallpaper has been installed over an unprepared wall, you plainly cannot remove it without doing serious damage to the plaster or drywall. There’s an easier way. It is possible to paint over wallpaper, if you do it correctly and with a little work, you can hide all the seams too.
Here are the steps to painting walls with textured wallpaper to achieve a smooth finish:
1. Protect all trim with painter’s tape.
2. Apply an odorless, oil-based primer to the walls. Make sure the room is well ventilated and that you wear a respirator. Do not use a latex- or water-based primer, as it will deactivate the glue under the wallpaper and create bubbles.
3. Once the primer is dry, apply the joint compound. Roll the joint compound onto an 8-by-4-foot area, then smooth it out with a trowel. Continue working around the room in sections until all the walls have been coated.
4. Allow the walls to dry for 24 hours.
5. Scrape the walls with a scraping tool to smooth out the joint compound.
6. Repeat steps 3 and 4 for a second coat.
7. After the second coat has dried, it needs to be sanded using a 180-grit sandpaper or sanding sponge. Have a lot of light in the room during this step so you can see fine lines, scratches and nicks, which can easily be sanded out. Again, make sure the room is well ventilated and wear a respirator.
8. Clean up all the dust created by the sa
1000
nding.
9. Now you apply one coat of primer and two coats of paint or more until full coverage is achieved.
By: We Love Painting
Article Directory: http://www.articledashboard.com
Jaworski Coatings, Inc
41735 Oberlin Elyria Road
Elyria, Ohio 44035
www.ohio-log-home-restoration.com
www.cleveland-ohio-painting-contractor.com
www.welovepainting.com
866-874-2114
Click the XML Icon Above to Receive Arts & Entertainment Articles Via RSS!
Additional Articles From – Home | Arts & Entertainment
Ment By Globalization
Book online cheap tickets Jet Airways
Cheap Air Tickets Jetlite
Three Red Lights Fix Review
Surprising Her with Flowers at Work
Read your Daily Horoscopes free
How to Shred Better on the Guitar: String Skipping Techniques
Parties That Brings Awesome Fun In Your Life
Indian film industry and entertainment
Technology Review
Mini Encyclopedia of Chess Game
Video and Film Production Services- A Guide for You
How To Gain Fans
1000
For Your Music Through The Internet Part 3
Patrick Sponem – Feel The Touch Of Beauty
KSA Writing Tips- the Best Guide for you
Commercial building owners are compelled by business goals to maintain their facilities, especially their coating systems, with the help of reliable painting professionals, rather than conducting the job with an in-house crew. This is because business requirements demand effective cost benefits in commercial coating maintenance projects.
Given the stringent business demands, what are the tools of the trade of commercial coating contractors? And given that there are quite a number of them plying the industry, what are the features of their services that they continually enhance and strive to excel in, to be set apart from the rest? Here are some of the values that commercial coating contractors commonly strive to adhere to, knowing that these are what clients wanted:
1. Quality service
A common aspiration of commercial coating contractors is to deliver quality service. They may define quality service in many ways, with a variation or two for each of them, but often they remain similar in the desire to adhere to industry standards of quality service. Often, quality service is a function of cost, performance, and good client relations, and painting contractors try their best to deliver all of these to please clients.
2. Wide paint selection
Commercial coating contractors realize the value of high-performance and long-lasting paints as a major factor of coating system success. As such, they continually evaluate and adopt the safest and top quality paints and materials to use in their projects. The contractor that can achieve the delicate balance between quality and cost is often preferred by commercial building owners.
3. Skilled painting techniques
Commercial coating contractors continually conduct skill-building activities to enhance their mastery of painting applications and methodologies. Often, it takes an on-the-job learning process to actually mold paint applicators into skilled artisans, which means that painting contractors that come with a long service record and experience usually have an edge when it comes to skills and proficiency.
4. Dedication to the proper painting process
A commercial coating contractor with a keen eye for upholding safety and accurate painting practices often gets the job done. For one, facility painting is basically hazardous at all stages of the painting process. Without proper preparation, or a negligent attitude towards tool, paint and equipment handling, can cause untoward accidents to happen.
5. Environmental commitment
From paint handling and disposal, to a conscientious selection and use of low-VOC paints, commercial coating contractors with a commitment to protect the environment are more often preferred by clients. With environmental degradation and protection as popular buzz words nowadays, and the green building movement taking hold, green paint contractors have the edge over competitors.
6. Industry certifications
Membership to professional and industry organizations signifies compliance to the highest standards of the profession. Undergoing certification on industry standards is a rigorous and time-consuming process, and being awarded a certificate of compliance is like a badge of honor that tells prospective clients how credible the commercial coating contractor is, in the eyes of peers or colleagues of the trade.
Commercial coating contractors enhance their knowledge and skills to rise above the competitors and deliver only the highest value to their clients. But whatever methods or values that they ascribe to, the success or failure of the painting job is usually the only determinant whether or not they have used the right strategies.
Steve A. Parker, Sr. Estimator, RaiderPainting.com – the preferred painting company for building owners and facility managers of commercial and industrial properties nationwide. Call 877-724.3371 for a free Estimate. And check out the Raider Painting Blog.
Article Source:
http://EzineArticles.com/?expert=Steve_A._Parker
If you are interested in buying real estate in Brighton, contact The Home Buyer’s Agent
Mail this post